HP HPE6-A80 Exam Syllabus Topics:
| Section | Weight | Objectives |
|---|---|---|
| Gather and Analyze Customer Requirements | 9% | - Identify business and technical requirements - Perform gap analysis - Document constraints, assumptions, and success criteria |
| Evaluate Requirements and Select Technologies | 20% | - Compare VSF, VSX, EVPN-VXLAN architectures - Security and access control options - RF and spectrum considerations - Aruba wired and wireless portfolio selection |
| Plan and Design Aruba Solution | 33% | - High-level architecture design - Scalability, redundancy, and high availability - Network services, management, and monitoring - RF planning and site survey principles |
| Recommend and Present the Solution | 8% | - Explain trade-offs and risk mitigation - Support phased deployment plans - Align design with business goals |
| Produce Detailed Design Documentation | 30% | - Bill of materials (BOM) and specifications - Implementation guidelines and assumptions - RF coverage and capacity documentation - Detailed topology and component selection |
HP Aruba Certified Design Expert Written Sample Questions:
Question #1
A customer has an Aruba wireless netwofK with:
* Two 7205 Mobility Controllers (MCs) in a cluster - Each MC must be able to support the complete network in the case of an MC failure
* 250 APs. which support a total of 7.500 devices
* A virtual CxQCQ ClearPass appliance with 1QK Access licenses
* An MM-HW-1K appliance
The customer is interested in an upgrade to Aruba CX Switches, primarily to benefit from the per-user tunneled node feature. The customer requires support for 2500 ports, and 95 percent of wined endpoints will use tunneled node.
Which change to the existing solution should the architect explain?
A. A separate ClearPass virtual appliance will be required to integrate with the AQS-Switches
B. The Mobility Master will need more MM licenses to support the wired endpoints that use tunneled node.
C. A new controller will be required to support sufficient clients, including the wired ones.
D. The clustering feature will need to be disabled on the controllers, so that they can support tunneled node.
Question #2
A customer requires new MCs for a large multi-site network with about 600 AP-535S ana 30,000 wireless clients. The customer requires redundancy for the MCs, with each MC being able to handle the full toad in a failover situation The network should be able to sustain the loss of a controller with stateful failover within seconds. It should be able to undergo software upgrades without downtime.
The architect has recommended two 7240XM MCs. The customer points out that 7220 MCs can support their requirements and wonders why the architect recommended me 7240XMS.
What should the architect explain?
A. The 724QXM MCs can support full CPSec tunnels with this number of APs. while the 7220 MCs cannot.
B. The 7240XM MCs are required to support the large number of wireless clients in this network
C. The 7240XM MCs have better redundant power supplies and fan tray component capabilities than 7220 MCs.
D. The 7240XM MCS provide a higher number of concurrent GRE tunnels to support 600APs with MCS in L2 clustering.
Question #3
The architect plans to recommend an upgrade to Aruba CX switches
What is one requirement for the new solution that justifies this recommendation?
A. the requirement to support larger ARP tables at the aggregation layer
B. the requirement to support secure IPsec tunneling at the aggregation layer
C. the requirement to support smart Rate at the access layer
D. the requirement to support tunneled-node at the access layer
Question #4
Refer to the exhibit.
A customer has an existing network with ArubaOS switches, Aruba 7205 controller, and 802.11ac APs. The customer needs a wired upgrade for their campus network and wireless upgrade with 802,11ax APs and would like to get all the functions of AP.
The customer has one building with 3 floors with the following wired devices,
* 200 VOIP phones
* 8 printers
* security cameras
The architect plans to propose 75 AP-535s.
The security cameras are a high definition pan-tilt-zoom with heaters for harsh environments that require more than 45 W to function, Which exhibit shows an access switch mat meets the customer needs?
A)
B)
C)
D)
A. Option A
B. Option D
C. Option C
D. Option B
Question #5
What is one reason to deploy an Aruba CX switch when compared to an ArubaOS switch?
A. to support Aruba Dynamic Segmentation
B. to obtain higher wattage power modules for enhanced PoE+ support
C. to support Zero Touch provisioning (ZTP)
D. to obtain API-enabled programmability for greater automation
Solutions:
| Question #1 Correct Answer: D | Question #2 Correct Answer: B | Question #3 Correct Answer: B | Question #4 Correct Answer: B | Question #5 Correct Answer: B |














1002 Customer Reviews
Quality and ValueITCertKing Practice Exams are written to the highest standards of technical accuracy, using only certified subject matter experts and published authors for development - no all study materials.
Tested and ApprovedWe are committed to the process of vendor and third party approvals. We believe professionals and executives alike deserve the confidence of quality coverage these authorizations provide.
Easy to PassIf you prepare for the exams using our ITCertKing testing engine, It is easy to succeed for all certifications in the first attempt. You don't have to deal with all dumps or any free torrent / rapidshare all stuff.
Try Before BuyITCertKing offers free demo of each product. You can check out the interface, question quality and usability of our practice exams before you decide to buy.
